GEL BOY JET 4S, Руководство по эксплуатации и обслуживанию

Страница: 13 / 36

ENGLISH
13
ENGLISH
3 - TECHNICAL FEATURES AND OPERATING CONDITIONS
The following conditions must be respected when using the motor pump:
- Liquid temperature: from + 0 °C to + 60 °C;
- Voltage variation allowed: ± 5%;
- Make sure the pump works in its nominal operation range;
- Protection grade: IP 44;
- Maximum level of acoustic pressure emitted: < 70 dB.
Single-phase motor 370 W
Max spraying pressure 40 water column meters
Tank 30 l
Dimensions L x Z x H 50 x 110 x 50 cm
Weight Kg 19
Accessories supplied High pressure hose
Flow rate 29 l/min (≈ 1,3 bar)
Max temperature 60 °C
4 - GENERAL DIRECTIONS
This manual contains important information about safety, working and maintenance of the
equipment.
• The machine may be used by children aged at least 8 years and by persons with reduced physical,
sensory or mental abilities, or without experience or necessary knowledge, provided that they are
supervised or have received instructions regarding the safe use of the machine and have understood
the relevant dangers;
• Children must not play with the machine;
• Cleaning and maintenance to be performed by the user must not be carried out by children without
supervision;
• For machines intended to be used at altitudes above 2000 m;
• Machine can run for a maximum time of 4 hours and must have a minimum rest period of 30 minutes;
• If the power supply cable is damaged, it must be replaced by the manufacturer or technical assistance
service or in any case by qualified personnel, in order to prevent any risk;
• Before connecting the motor pump, make sure the socket is earthed in compliance with regulations;
• Before any inspection or maintenance operation, cut off power and unplug the pump; during operation
the motor can be hot: be careful;
• The pump must work with clean water; it is not suitable for pumping flammable liquids or for operating
in places with danger of explosion;
• Avoid contact between the power supply and the liquid to be pumped;
• Do not modify any components of the motor pump;
• The warranty is void if the pump is repaired by non-authorized personnel. This also means operating
with unsafe and potentially dangerous equipment.