3
www.geiger.de
EN
EN
4. Safety information
f
The control is determined for use within the limits of the specified application
described in point 3 hereafter. If any unauthorised changes or modifications to the
control are made, all warranty claims with regard to this product become extinct.
f
Immediately after unwrapping of the control, it must be checked for damages. In the
event of damages, the device must in no case be put into operation. Should damages
have occurred, the supplier must be informed thereof immediately.
f
If it is to be assumed that a safe operation of the control cannot be guaranteed, the
control must immediately be taken out of operation and be protected against any
unintentional or unauthorised operation. This assumption becomes real in the event
the housing shows damages or if the device doesn‘t work any more.
f
The responsibility for the compliance with the relevant regulations established by
the power supply companies or the Union of German Electrical Engineers (VDE) is,
according to VDE incumbent on the user and the related fitting firm.
5. Installation
The radio sun sensor GF0031 suits for the control of sunshade installations within the limits of a
normal room (range approx. 15 metres).
The sun sensor must be mounted in front of or next to the sunscreen that is, the sunscreen
must not shade the sun sensor.
A suction cup enables to fix the device in an easy manner directly on the window pane. The
light sensor faces outwards. It is operated using the keys S1 and S2.
Therefore, select the installation location so that there is a direct visual contact between the
sensor GF0031 and the receiver.
6. Use
Switch on sensor
Press S2 (> 2 sec.).
The sensor is activated.
The green LED flashes three
times for confirmation.
Switch off sensor
Press S1 (> 2 sec.).
The sensor is turned off.
The red LED flashes three times
for confirmation.
How to test the function
of high light intensity (sun protection closed)
Press key S2 briefly (1 sec.). After releasing the key, the transmission is carried out and the
green LED flashes once.
How to test the function of weak light intensity (sun protection open)
Press key S1 button briefly (1 sec.). After releasing the key, the transmission is carried out and
the red LED flashes once.
Programming of the transmitter
Activate programming mode on the sensor
Press keys S1 and S2 for 3 sec. The red and the
green LED blink alternately.
Programming of the transmitter:
Place the transmitter as displayed and within
20 sec. activate the UP or DOWN key with the
channel sun. The green LED flashes for 0,5 sec.
on the sensor. The transmitter has been learned
and the programming mode is exited. You can also quit the programming mode with the
operation of S1 or S2.
OFF
ON
Light sensor
Key S1
Key S2
Solar cell
Sucker
Red
LED
Green
LED
OF
F
ON
123456
