9
Inital Set Up:
6. With clean hands and the dispenser unplugged,
place the Receiving Plate flat at the base of the
dispenser’s warming cavity, with the rounded end
facing toward the back of the dispenser (as shown
in the diagram).
• The Receiving Plate is ESSENTIAL for operation.
THE DISPENSER WILL NOT PROPERLY
FUNCTION UNLESS THE RECEIVING PLATE IS
INSTALLED CORRECTLY.
• Keep track of the Receiving Plate. If the Receiving
Plate comes out of the dispenser when removing
a bag of cheese/chili sauce, detach it from the
bag’s Valve with clean hands and immediately
and safely place it back in the base of the
dispenser as described above. This placement
must be done before inserting another bag of
cheese/chili sauce. Failure to correctly reinstall
the Receiving Plate can result in a bag’s Valve
sticking open and leaking cheese/chili sauce.
• The Receiving Plate must be in place whenever
the dispenser is plugged in.
7. With the dispenser unplugged, install the Funnel
on the tracks behind and below the push button
by sliding it onto the machine from the front, short
end first. Ensure there are no gaps between the
Funnel and the dispenser.
The Funnel acts as a guide to know where
cheese/chili sauce will exit the dispenser.
Funnel
Front view Aerial view
