Gehl V270 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 102

background image

36

917387/BP0310

Auxiliary Hydraulic System

Auxiliary hydraulics are used with attachments that have a mechanism requiring
hydraulic power.

Always be sure the auxiliary hydraulic control is in neu-
tral before starting the loader or disconnecting the auxil-

iary hydraulic couplers.

Standard-Flow Auxiliary Hydraulic Control

Loaders are equipped with a standard-flow auxiliary hydraulic system with flat-
face couplers. The couplers are located under the lift arm on the left side.

Hand/Foot and Joystick Control Loaders
Equipped with Electric Auxiliary: The
yellow thumb switch located on the right-
hand control controls the direction and
amount of flow. The farther the switch is
moved from center, the higher the flow to
the auxiliary circuit. The direction of flow
is reversed when the thumb switch is
moved in the opposite direction from the
center. For continuous operation, move the
switch in either direction and pull the red
trigger button, located on the front of the
grip for 5 seconds, and release. To cancel
continuous operation, pull the red button or
move the yellow switch in either direction.

High-Flow Auxiliary Hydraulic Control (optional)

In addition to a standard-flow auxiliary
hydraulic system, some loaders are
equipped with a reversible high-flow aux-
iliary hydraulic system. These couplers
are located on the right lift arm. The high-
flow auxiliary hydraulic system is used
for operating certain hydraulic attach-
ments (e.g., cold planer, snowblower) that
require higher flows.

The high-flow auxiliary switch controls
the direction of hydraulic oil flow. The
switch is located on the upper left side
instrument panel. Push the right side of the rocker switch for forward flow, or the
left side for reverse flow. To disengage, push and release either side of the
switch. Turning off the machine, raising the restraint bar, or restarting the engine
will also reset the high-flow to neutral. A lamp on either side of the switch will
illuminate when the high-flow auxiliary hydraulic system is engaged.

WARNING

Figure 15 T-Bar/Joystick Elec-

tric Auxiliary Control

Figure 16 High-Flow Auxiliary

Switch

«
...
38
39
40
41
42
...
»

Содержание V270







































































































Отзывы:

Нет отзывов

Похожие инструкции для V270

Бренд: Hitachi Страницы: 374

Бренд: jcb Страницы: 51

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды