Gehl SL7600, Руководство оператора

Страница: 27 / 90

9. Hourmeter –
Indicates the total operating hours of the loader.
10. Fuel Level Gauge – Indicates the amount of fuel in the tank.
11. Engine Coolant Temperature Gauge –
Indicates the engine coolant
temperature.
12. Light Switch –
Controls all the lights (standard and optional) on the
loader. Symbols denote the four positions of the light switch. In a
clockwise direction these are: Off, Flashers (Hazards), Work Lights with
Flashers, and Tail Lights. For the lights to function, the keyswitch must be
in the
RUN
position.
13. Keyswitch – In a clockwise rotation, these positions are:
Off Position –
With the key vertical (
OFF
) in the keyswitch, power from
the battery is disconnected from the controls and instrument panel
electrical circuits. This is the only position the key can be inserted or
removed from the keyswitch.
On or Run Position – With the key turned one position clockwise (
RUN
)
from the vertical (
OFF
) position, power from the battery is supplied to all
control and instrument panel electrical circuits.
Start Position – With the key turned fully clockwise (
START
) and held in
position, the electric starter energizes, starting the engine. Release the key
after the engine starts (it returns to the
RUN
position by itself).
Note:
The engine cannot be started unless the operator sits in the seat and the
restraint bar is lowered.
14. Circuit Breakers –
Four circuit breakers on the instrument panel protect
the loader’s electrical circuits.
Important: Do not attempt to defeat the circuit protection by jumping
across a circuit breaker or by using a higher amperage circuit breaker.
908274/BP1202 24