Gehl PowerBox 1639, Руководство оператора

Страница: 30 / 66

9. Using the Track Control Levers, maneuver the
Paver on the trailer or truck for best transporting
and balanced position.
10. Rear Loading: After the Paver is on the vehicle
bed, place one Track Lever in “forward” and one in
“reverse”. The machine will rotate to legal width
for transport.
11. Return the Screed to flat position by turning the
Depth Adjustment Screws in a clockwise didrec-
tion (7 or 8 turns).
12. (Fig. 12) Lower the Screed and place chains in the
two tiedown points at the rear of the Paver. Drive
the paver forward allowing chains to tighten slight-
ly.
13. (Fig. 12) Place a tiedown chain in the tiedown
point on the front of the Paver and bind down to
the vehicle bed.
14. Turn the Keyswitch to “off” position and remove
the Key.
In Transit
If in transit for a few days: (a) Disconnect the Battery.
(b) Clean all bright surfaces and coat with heavy, very
high flash point grease to prevent rusting.
THEFT DETERRENTS
THE CERTAINTY OF APPREHENSION IS A
STRONG DETERRENT TO THIEVERY OF CON-
STRUCTION EQUIPMENT! GEHL has recorded
Part Numbers and Serial Numbers. Users should take
as many of the following actions as possible to dis-
courage theft, to aid in the recovery in the event that
the machine is stolen, or to reduce vandalism:
1. Remove keys from unattended machines.
2. Attach, secure, and lock all anti.vandalism and
anti-theft devices on the machine.
3. Inspect the gates and fences of the vehicle storage
yard. If possible, keep machines in well lighted
areas. Ask the law enforcement agency having
jurisdiction to make frequent checks around the
storage or work sites, especially at night, during
weekends, or on holidays.
4. Report the theft to the dealer and insurance com-
pany. Provide the model, and all serial numbers.
5. Request that your dealer forward this same infor-
mation to GEHL Co.
Printed In U.S.A.
31
907389/AP297
Discount-Equipment.com