English
11
Installation
Powering On the Projector
1. Remove the lens cap.
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will fl ash green.
3. Turn on the lamp by pressing “Power/Standby” button on
the control panel.
And the Power LED will turn green.
The fi rst time you use the projector, you can select your
preferred language from quick menu after the startup screen
display.
4. Turn on your source (computer, notebook, video player,etc.).
The projector will detect your source automatically.
If you connect multiple sources at the same time, use the
“Source” button on the control panel or use the “VGA“, ”S-
Video”, “Composite“ button on the remote control to switch.
Powering On/Off the Projector
Turn on the projector
fi rst and then the signal
sources.
Quick Menu
Power/Standby
Lens Cap
1
LAMP
POWER
POWER/
STANDBY
R
E
-S
YN
C
2
