10
1. Switch on the appliance by pressing the ON/OFF switch.
2. The operating status display is red. The appliance is ready for operation when the
operating status display is blue. Warming up takes about a minute.
3. Centre the item to be laminated into the laminating pouch (thickness of up to 125 µm).
Make sure that the document or picture is as close as possible to the sealed edge.
The use of a carrier is not required for this laminator.
4. Guide the sealed edge of the laminating pouch into the middle of the insertion slot
keeping it as straight as possible.
5. Remove the laminated item from the back of the appliance after lamination.
6. Certain types of paper are not laminated uniformly and seem slightly dull or cloudy.
In such cases you can improve the quality of the lamination by putting the laminated
document through the laminator a second time.
7. If the item being laminated has jammed in the machine, push back the ABS lever
and pull the item out manually.
CLEANING AND CARE
- Keep you hands and the power cable away from hot parts during and after lamination.
Let the appliance completely cool down before cleaning it.
- Never immerse the appliance in water.
- Only use a soft cloth to clean the appliance.
- Never clean the appliance with abrasive powder, scrapers or wire combs.
- Never open the appliance yourself. Otherwise, there is a risk of fire and electric shock.
There are no parts in the appliance that can be maintained by the user. Repairs must
always be carried out by trained specialists.
Manual_A4_Comfort:Layout 1 21.07.10 14:54 Seite 10