5
85194E_MAN_Electrical Installation for Probes_KS and KS-SIL2 Series_08-2022_ENG
4. Technical specifications
Output signal
VOLTAGE
RATIOMETRIC
CURRENT
Non Linearity (BFSL)
± 0.15% FS (typ) ± 0.25% FS (max)
Hysteresis
+ 0.1% FS (typ) + 0.15% FS (max)
Repeatability
± 0.025% FS (typ) ± 0.05% FS (max)
Zero offset tolerance
± 0.15% FS (typ) ± 0.25% FS (max)
Span offset tolarance
± 0.15% FS (typ) ± 0.25% FS (max)
Accuracy at room temperature (1)
< ± 0.5% FS
Pressure ranges (2)
From 1 bar to 1000 bar (See table)
Resolution
Infinite
Overpressure (without degrading performance)
See table
Pressure containment (burst test)
See table
Pressure Media
Fluids compatible with Stainless Steel AISI 430F and 17-4 PH
Housing
Stainless Steel AISI 304
Power supply (4)
B/M/P 10...30Vdc
R 11...30Vdc
N/C/T/Q 15...30Vdc
5Vdc ± 0,25V
10...30Vdc
Max current absorption
15mA
35mA
Dielectric strenght
250 Vdc
Zero output signal
B/M/P/R/N/C/T/Q
0.5Vdc (X)
4 mA (E)
Full scale output signal
B/M/P/R/N/C/T/Q
4.5Vdc (X)
20 mA (E)
Allowed load
≥ 5KΩ
see load diagram
Long term stability
< 0.2% FS/per year
Operating temperature range (process)
-40...+125°C (-40...+257°F)
Operating temperature range (ambient) (5)
-40...+105°C (-40...+221°F)
Compensated temperature range
-20...+85°C (-4...+185°F)
Storage temperature range
-40...+125°C (-40...+257°F)
Temperature effects over compensated range (zero)
± 0.01% FS/°C typ. (± 0.02% FS/°C max.)
Temperature effects over compensated range (span)
± 0.01% FS/°C typ. (± 0.02% FS/°C max.)
Response time (10...90%FS)
< 1 msec.
Warm-up time (3)
< 30 sec.
Mounting position effects
Negligible
Humidity
Up to 100%RH non-condensing
Weight
80-120 gr. nominal
Mechanical shock
100g/11msec according to IEC 60068-2-27
Vibrations
20g max at 10...2000 Hz according to IEC 60068-2-6
Ingress protection
IP65/IP67 (M12 version) with female homologated connector mounted, tightening
torque 0.6Nm + low strength threadlocker
Output short circuit and reverse polarity protection
YES
EC Conformity
According to Directive 2014/30/EU
FS = Full scale
1
Incl. Non-Linearity, Hysteresis, Repeatability, Zero-offset and Span-offset (acc. to IEC 61298-2)
2
The operating pressure range is intended from 0.5% to 100% FS
3
Time within which the rated performance is achieved
4
The devices must be supplied with a Class 2 Power Supply (as for NEC) or LPS Power Supply (as for EN 60950). If devices are permanently connected to the machine it’s
requested an external switch or circuit breaker and external overcurrent protection.
5
See possible restrictions in the paragraphs “Electrical connections” and “Accessories on request”.
Range (bar)
1
1.6
2
2.5
4
6
10
16
20
25
40
60
100
160
200
250
400
600
1000
Overpressure
(Bar)
6
6
6
10
10
20
20
32
40
50
80
120
200
320 400
500
800
1200 1200
Burst pressure
(Bar)
9
9
9
15
15
30
40
64
80
100 160
240
400
640 800 1000 1500 1500 1500
