gefran AFE200 4 Series, Инструкция по эксплуатации

Страница: 59 / 214

AFE200 • Instruction Manual
59
6 - Use of the keypad
This chapter describes the keypad and methods of use for display and program -
ming of AFE200 parameters.
6.1 Description
T+ T- EN LOC ILim n:0 AL
01 MONITOR
02 DRIVE INFO
03 STARTUP WIZARD
04 DRIVE CONFIG
7 virtual leds line:
Four alphanumeric lines
with 21-digit each
led is lit
led is off
Membrane keyboard :
• commands
• navigation
LCD display
Membrane keyboard
AFE200 control programming menu navigation keys.
Symbol Reference Description
Start Activates the AFE
Stop Quick stop and generation of the Emg stop alarm [21] if programmed in the Stop key
mode parameter, PAR 1008
ESC
Escape Returns to the higher level menu or submenu. Exit from a parameter, a list of parameters,
from the list of the last 10 parameters and from the
Goto
parameter function (see CUST).
Can be used to exit from a message that requires use of this.
FWD
REV
Forward/Reverse Not used
LOC
REM
Local/Remote Changes the method of use from local to remote and vice versa.
Is active only if the AFE is not enabled.
RST
Reset Resets alarms only if the causes have been eliminated.
CUST
Custom The first time it is pressed, displays the list of the last 10 parameters modified.
Pressing this key a second time activates the Goto parameter function for access to a
parameter through its number. To exit these functions, press the
◄
key.
DISP
Display Displays a list of AFE functioning parameters.
E
Enter Accesses the submenu or parameter selected or selects an operation,
Is used during parameter modification to confirm the new value set.
▲
Up Moves selection in a menu or a list of parameters up.
During modification of a parameter, increases the value of the digit under the cursor.
▼
Down Moves the selection in a menu or a list of parameters down.
During modification of a parameter, decreases the value of the digit under the cursor.
◄ Left
Returns to the higher level menu.
During modification of a parameter, moves the cursor to the left.
►
Right Accesses the submenu or parameter selected.
During modification of a parameter, moves the cursor to the right.