GEFRAN-SIEI ARTDriveG EXP-D6A1R1-AGy, Инструкция по эксплуатации

Страница: 13 / 16

13
—————— Expansion card ——————
English
8.3 Digital outputs
Output type _________________________ Open collector or opto-isolated open
emitter
Pull down ___________________________ Not available
Output number _______________________ 2
Connection _________________________ NPN or PNP with external power supply
independent for each output
Mechanics __________________________ extractable terminal which can be
connected to a section of 0.14 ... 1.5 mm
2
Power supply voltage __________________ 15 ... 30V DC
Output current _______________________ 50mA max each
Output voltage (UHigh) ________________ Power supply voltage -1V @50mA
Hw delay time on the rise edge __________ 3ms (load: 1k
Ω
@ 24V)
Hw delay time on the drop wire leading edge __ 100ms (load: 1k
Ω
@ 24V)
8.4 Relay digital outputs
Output type _________________________ Relay with switch contact
Output number _______________________ 1
Mechanics __________________________ extractable terminal which can be
connected to a section of 0.14 ... 1.5 mm
2
Contact voltage ______________________ 250V AC max
Contact current ______________________ 5A max
AC commutable power (ohmic load ) ______ 1000VA max
Mechanical duration ___________________ > 30 * 10 6 moves
8.5 Analog outputs
Output type _________________________ voltage or current output to be selected
with the jumper
Output number _______________________ 1
Connection _________________________ 0V in common with 0V AGy
Mechanics __________________________ extractable terminal which can be
connected to a section of 0.14 ... 1.5 mm
2
8.5.1 Selection of the voltage output
Output voltage _______________________ 0 ... 10V
Output current _______________________ 5mA max
8.5.2 Selection of the current output
Output voltage _______________________ 0 ... 14V
Output current _______________________ 0 ... 20mA max (or 4 ... 20mA)
Output impedance ____________________ 50 ... 550
Ω