7
1 HDMI
Output
Connect the HDMI capable device to this output port.
2
Distance Control Dip Switches
These 2 Dip Switches are used to adjust the video/audio signal for specifi c
CAT-5 cable lengths. Please use the table on page 9 for more information on
this setting.
3
Equalization Trim Pot
This Trim Pot is used to adjust the amount of equalization that is applied to
the incoming signal. This setting must be adjusted to receive the best possible
quality.
4
Gain Trim Pot
This Trim Pot is used to adjust the amount of gain that is applied to the incoming
signal. This setting is meant to adjust the brightness of the incoming video
signal.
5
RJ-45 Port (Video)
This port accepts an CAT-5, CAT-5e or CAT-6 cable for receiving of the video
and audio signals from the sender.
6
RJ-45 Port (DDC)
This port accepts an CAT-5, CAT-5e or CAT-6 cable for connection to the
sender. This cable will be used for DDC and HDCP data.
7
5V DC Power Input
Connect the included 5V DC power supply between this input and an open wall
power socket.
8
Power LED indicator
The LED will become active once the included 5V DC power supply has been
properly connected.
RECEIVER UNIT PANEL DESCRIPTIONS
