page | 4
Getting Started
Panel Layout
Receiver Unit (Front)
ID
Name
Description
1
Link 1
Connect a CAT-7 cable between this RJ-45
jack and the Link 1 jack on the Sender unit.
2
Link 2
Connect a CAT-7 cable between this RJ-45
jack and the Link 2 jack on the Sender unit.
Both Link 1 and Link 2 jacks (two CAT-7
cables) must be used when extending
video resolutions up to 2560 x 1600.
3
Link 2
Connect a CAT-7 cable between this jack
and the USB Link jack on the Sender
unit. This RJ-45 jack must be used when
extending USB.
4
5V DC
Connect the included 5V DC locking power
supply to this connector and plug the AC
power cord into an available electrical outlet.
Only use the power supply shipped with this
unit.
1
2
3
4
