The DVI to HD-SDI Pro can be controlled via the RS-232 port on the rear of the unit.
Please refer to the Communication Protocol for Gennum VXP Products on Gefen’s
website at: http://www.gefen.com/kvm/support/download.jsp.
1
Connect your computer’s RS-232 (serial) port to the RS-232 port on the
DVI to HD-SDI Scaler Pro using a male to female, straight pin-to-pin
RS-232 cable. Do not use a null modem cable.
2
Please download the latest fi rmware from Gefen’s website at:
http://www.gefen.com/kvm/support/download.jsp
3
Open and edit the setup.bat fi le and on the line “set comport=” edit the port
number to match your comport number.
4
Run the setup.bat batch fi le and follow the instructions
RS-232 CONTROL
FIRMWARE UPDATE PROCEDURE
8