Gefen Pro DVI FM 2000, Руководство пользователя, Страница: 9 / 16

5
SENDER UNIT DESCRIPTIONS
5
SENDER UNIT DESCRIPTIONS
1 Status
This LED indicator will glow bright blue, indicating that there is a valid connection between the Sender
unit and Receiver unit. This LED will glow red when there is an interruption in the signal between the
Sender unit and the Receiver unit.
2 Power Receptacle
Connect the optional 5V DC power supply to this receptacle only if the source does not supply enough
voltage to power the Sender unit. In most situations, the power supply will not be required.
3 SC Fiber Connectors
Connect two SC Fiber Optic cables from the Sender unit to the Receiver unit. Make sure that the Fiber
Optic cables from both port A and B are connected to the same ports on the Receiver unit. See page
8 for details.
4 DVI Input
Connect this part of the Sender unit to the DVI port on the computer.
1 Status
This LED indicator will glow bright blue, indicating that there is a valid connection between the Sender
unit and Receiver unit. This LED will glow red when there is an interruption in the signal between the
Sender unit and the Receiver unit.
2 Power Receptacle
Connect the optional 5V DC power supply to this receptacle only if the source does not supply enough
voltage to power the Sender unit. In most situations, the power supply will not be required.
3 SC Fiber Connectors
Connect two SC Fiber Optic cables from the Sender unit to the Receiver unit. Make sure that the Fiber
Optic cables from both port A and B are connected to the same ports on the Receiver unit. See page
8 for details.
4 DVI Input
Connect this part of the Sender unit to the DVI port on the computer.