Gefen HDTV-444, Руководство пользователя

Страница: 8 / 9

USING THE 4X4 DVI MATRIX
Connect all the computers to DVI In and USB In on the 4x4 DVI Matrix, using the
supplied cables. DVI In 1 and USB In 1 must be connected to the same computer,
all the other inputs must connect the same way.
Connect the USB devices and DVI displays to the outputs on the 4x4 DVI Matrix
using the supplied cables.
Connect the optional RMT-4 wired remote controls to the 4x4 DVI Matrix.
Connect the 24VDC powersupply to the 4x4 DVI Matrix
Using the RMT-16
Buttons Switches
1-4 Output 1 to
Input 1-4
5-8 Output 2 to
Input 1-4
9-12 Output 3 to
Input 1-4
13-16 Output 4 to
Input 1-4
Booting up the computers - When your computer boots up it looks for an EDID
(extended display identi fi cation data) from the display to tell it what monitor is con-
nect and what resolution to output. During boot up of the computers you should
have ONLY one output selected to one input at a time so that the computer gets
the EDID of the display that is selected. If you have multiple outputs selected to
one computer, the computer will read the EDID of the last output selected to it. If
all your displays are the same, or all displays are capable of running at the same
resolution then this step does not matter.
1
2
3
4
5
6
5