Gefen GTV-MFDA-148, Руководство пользователя, Страница: 11 / 20

8
CONNECTING AND OPERATING THE 1:8 MULTI FORMAT
VIDEO DISTRIBUTION OVER ETHERNET
How to Connect the
GefenTV 1:8 Multi Format Video Distribution over Ethernet
(Direct Connection using Sender and Receiver)
1. Connect the source(s) to the Sender unit using VGA, Component, Compos-
ite or S-Video cables. If audio is desired on the output, connect a 3.5mm
mini stereo audio cable to the rear of the Sender unit. Connect the other
end of the audio cable to the audio source.
2. Connect the Receiver to the display using a VGA and/or a Component cable.
3. Attach one end of an Ethernet cable from the Sender unit to each Receiver.
The Ethernet cable(s) connecting the Sender to the Receiver should be no
longer than 100 meters (330 feet) in length.
4. Using one of the included 12V DC power supplies, connect it to the power
receptacle at the rear of the Sender unit. Connect the power adapter to an
available wall outlet.
5. Connect the other 12V DC power supply to the Recevier unit then plug the
adapter into an available wall outlet.
6. Use the SELECT button on the Sender unit (page 4) to select the desired
input video source. Pressing the SELECT button on the Sender will cycle
through each input on the Sender. The LED next to the selected output will
be displayed on the Input Selection Indicator (page 4).
7. Use the SELECT button on the Receiver unit (page 6) to select between
VGA or Component output. The LED next to the selected output will be
displayed on the Output Selection Indicator (page 6).
8. Once the correct video input and output selections are made, video will ap-
pear on the connected display. If audio is used on the Sender and Receiver,
audio should be heard clearly through the display.
Note: The maximum supported input and output resolution for VGA is
1280x1024 @ 60Hz. YPbPr (Component) output supports a maximum of 720p
@ 60Hz.