Gefen GTB-HD4K2K-848-BLK, Руководство пользователя

Страница: 19 / 146

page | 7
Introduction
Installing the IR Remote Battery
The IR remote control unit ships with two batteries. Only one battery is required for
operation. The second battery is a spare.
1. Remove the back cover the IR Remote Control unit.
2. Insert the included battery into the primary battery slot. The positive (+) side of the
battery should be facing up.
3. Replace the back cover.
Setting the IR Remote Channel
In order for the included IR remote control to communicate with the 4K Ultra HD 8x8 Matrix
for HDMI, the IR remote control must be set to the same channel as the matrix. Use the
#set_ir command to set the IR channel of the matrix.
IR Channel DIP settings
0
(default)
1 2
ON
1
1 2
ON
1 2
2
1 2
ON
3
1 2
ON
Ge
tting S
tar
ted
P/N: RMT-848IRN
ON
1 2
www.gefen.com
Warning
Use only 3V CR2032-type batteries. Risk of explosion if battery is replaced by
an incorrect type. Dispose of used batteries according to the instructions.
DIP switches