page | 11
Using Multichannel Audio
Use this audio mode when the connected displays (and/or other sink devices) are capable
of supporting various audio formats.
1. Disconnect the power supply from the splitter.
2.
Set the
EDID
switch to the
Int
position.
3.
Set the
Audio
switch to the
Multi-ch
position.
4. Reconnect the power supply.
If either the
EDID
or
Audio
switch are moved to another position while the splitter is
powered, then power-cycle the splitter by disconnecting and reconnecting the power
supply in order for the changes to take effect.
5. When the
Audio
switch is set to the
Multi-ch
position, the following audio output
formats are supported:
Audio Format
Audio Format
LPCM 2CH
LPCM 8-channel
Dolby® Digital
Dolby® Digital Plus
Dolby® TrueHD
DTS®
DTS-HD Master Audio™
MLP (PPCM)
Operating the 1:8 Splitter for HDMI 4K x 2K
Setting the Audio Channel Mode
Set to the
Multi-ch
position
