Gefen EXT-VGAAUD-CAT5-142, Руководство пользователя

Страница: 8 / 19

5
SENDER PANEL DESCRIPTIONS
1 5V DC Power Input
Connect the included 5V DC power supply input this port. Once this has been
properly connected the power LED will become active.
2 Power LED Indicator
This LED will become active once the included 5V DC power supply is properly
connected.
3 VGA Input
Connect the VGA source device to this input.
4 3.5mm Mini-Phono Jack Analog Stereo Input
Connect the VGA source’s analog audio to this input. This will send audio from
the source location to the receiver location.
5 3.5mm Mini-Phono Jack Analog Stereo Output (Mic. Out)
This port will output audio that is sent from the receiving location. This port will
receive audio from a microphone device that is connected to the receiver.
6 CAT-5 Port
Connect a CAT-5e cable between the CAT-5 ports on both the sending and
receiving units.