Gefen EXT-VGA -145, Руководство пользователя, Страница: 7 / 11

CONNECTING AND OPERATING THE 1:4 VGA HUB
How to Connect the 1:4 VGA Hub to your devices
1. Connect the supplied VGA cable from the VGA device into the 1:4 VGA Hub
Input.
2. Connect the cables from your displays (monitor or projector) into the VGA Out
slots in the back of the 1:4 VGA Hub
3. Plug the 5v power supply into the 1:4 VGA Hub.
4. Plug the 5v wall-mount power supply into the wall outlet.
NOTE: Display information (EDID) is not sent back to the source. Standard VESA
resolutions should be output by most computers without the need of an EDID. If us-
ing a non-VESA standard resolution or if EDID is needed, an EDID storage and re-
lay device is necessary. Gefen recommends the use of a DVI Detective (part# EXT-
DVI-EDID, EXT-DVI-EDIDN, or EXT-DVI-EDIDP) with two VGA to DVI adapters.
4
Connection Diagram for the 1:4 VGA Hub:
Computer
Splitter
VGA Monitor
VGA Monitor
VGA Monitor
HDMI CABLE
4