4
CONNECTING THE RACK TRAY
Reattach the clamping plate to the
Rack Tray to secure each unit in
place.
The Rack Tray provides four (4)
2.5 mm 5V DC power connectors
that connect to the Gefen locking
power connectors. If the device
being used has 2.1 mm non-locking
power connectors, then the included
adapters must be used.
WARNING:
Attempting to connect
a 2.5 mm plug to a 2.1 mm
power receptacle will result in an
intermittent connection.
IMPORTANT:
When reassembling
the clamping plate, make sure
that the raised lip on the top of the
clamping plate faces the back of the
Rack Tray.
Make all necessary connections to
each device within the Rack Tray.
Connect the included AC power cord
to the power supply on the back of
the Rack Tray.
NOTE:
Pre-drilled holes are provided
in both the clamping plate and the
bottom of the unit. A bolt and nut
can be used to further secure the
clamping plate, if necessary.
4x
Содержание EXT-RACK-MGPR
Страница 1: ... ...
Страница 8: ...Rev A1 Pb This product uses UL listed power supplies ...
