Gefen EXT-HDSDI-2-HDMIS, Руководство пользователя

Страница: 13 / 25

10
IR REMOTE CONFIGURATION
Setting the IR Remote Channel on the RMT-8HDS-IR
In the event that IR commands from other remote controls confl ict with the
supplied IR Remote Control Unit, changing the remote IR channel will fi x this
issue. The IR Remote Control Unit has a bank of DIP switches for setting the
Remote IR channel.
The DIP Switch bank is located underneath the battery cover.
1 2 1 2
1 2 1 2
Remote Channel 3:
Remote Channel 1:
Default
Remote Channel 2:
Remote Channel 4:
Left: Picture of the opened rear battery
compartment of the IR Remote Control
Unit showing the exposed DIP Switch bank
between the battery chambers.
The IR channel selected on the IR Remote Control unit must match the IR
channel assigned to the HDSDI to HDMI Scaler. For example, if both DIP
switches on the remote are in the down position (IR channel 1), the HDSDI to
HDMI Scaler must be set to IR channel 1.
Refer to page 13 on how to change the IR channel on the HDSDI to HDMI
Scaler.