Gefen EXT-HDMI1.3-848CPN, Руководство пользователя

Страница: 15 / 31

12
How to Resolve IR Code Confl icts
In the event that IR commands from other remote controls interfere with the
supplied IR remote, changing the remote IR channel will fi x the problem. The
IR remote control has a bank of DIP switches used for setting the remote IR
channel.
The DIP switch bank on the IR remote is located underneath the battery cover.
1 2 1 2
1 2
1 2
Remote Channel 2:
Remote Channel 0:
Default
Remote Channel 1:
Remote Channel 3:
Left: Picture of the opened rear battery
compartment of the IR remote showing the
exposed DIP Switch bank between the battery
chambers.
It is important that the remote IR channel selected on the remote, matches the
IR channel set on the Gefen 8x8 Crosspoint Matrix for HDMI 1.3. For example,
if both DIP switches on the IR remote are set to IR channel 0 (toward the “1” and
“2”), the Gefen 8x8 Crosspoint Matrix for HDMI 1.3 must be set to use IR channel
0.
See page 14 on how to change the IR channel on the Gefen 8x8 Crosspoint
Matrix for HDMI 1.3.
IR REMOTE CONFIGURATION