9
DIP SWITCH FEATURES
The DIP switch feature panel is located on the underside of the HDMI to 3GSDI
Converter. Please use the diagram and chart below to confi gure the DIP switch
settings.
DIP SWITCHES
Switch
Description
OFF
(Factory Default)
On
1
Test pattern
Off
On
2
N/A
N/A
N/A
3
RGB Input Range
16-235(limited)
0-255 (full)
4
N/A
N/A
N/A
5
3G Mapping
(425M Level)
Direct (A)
Direct (A)
6
N/A
N/A
N/A
7
N/A
N/A
N/A
8
N/A
N/A
N/A
1
The color bar test pattern is in 720p (60Hz) format. No valid input is
necessary at the SDI connector to use the test pattern.
3
“RGB input range” switch is used to force the compression of the video
from 0-255 to 16-235 values (from full range to limited). It is useful when the
HDMI source connected to the HDMI to 3GSDI Converter sends full range
video (0-255) even if the EDID on the HDMI to 3GSDI Converter is asking
for limited range. When set to ON (FULL), the unit will compress the video
range to limited.
5
Please note that some 3G SDI equipments do not support both level A and
level B. Set this switch according to the supported 3G level of your SDI
equipment connected to the HDMI to 3GSDI Converter.
