Gefen EXT-HDMI1.3-143, Руководство пользователя

Страница: 18 / 26

page | 8
The 1:3 Splitter for HDMI 1.3 features EDID Management. Before the source can send
video and/or audio to the display (sink), the source reads the EDID (Extended Display
Identification Data) from the sink (display) devices that are connected to the splitter. The
EDID contains information about what type of audio/video data that the source can send
to each output device. The splitter can use either the downstream EDID (from the display/
sink) or the built-in internal EDID.
Selecting the EDID Mode
1. Press and release the EDID button, on the back panel, to toggle between internal
and external EDID modes.
2. The LED indicators on the front panel will display the current EDID mode.
3. After the desired EDID mode is selected, press the Reset button on the back panel.
The splitter must be reset or power-cycled when switching between EDID modes.
EDID button
EDID Management
Internal EDID in use
External EDID in use
Operating the 1:3 Splitter for HDMI 1.3