Gefen EXT-HDMI1.3-142D, Руководство пользователя

Страница: 8 / 15

5
PANEL DESCRIPTIONS
1 Power LED
This LED will activate once a valid power source is applied.
2 Internal EDID LED
This LED will activate only when the pre-programmed internal EDID is being
used. Please see page 7 for more details on the internal EDID.
3 External EDID LED (default EDID routing)
This LED will activate only when the external EDID is being used. Please
see page 7 for more details on the external EDID.
4 Link LED
This LED activates when a valid link between source and splitter is detected.
5 Optical Digital Audio Output
This optical output will supply supported audio formats for output to an
external audio decoder or device such as an amplifi er or receiver. See the
Operation Notes on page 2 for more information about supported audio
formats on this output.
6 EDID Button
This button will activate the onboard EDID. Press this button (the Int. EDID
should turn on and the Ext. LED should turn off) and reset the unit using the
Reset button (below) to initialize this EDID mode. To use an external EDID,
press the EDID button again (the Int. LED should turn off and the Ext. LED
should turn on) and press the Reset button to initialize this EDID mode.
Please see page 7 for more information.
7 Reset Button
This button will reset the unit and initialize whichever EDID mode is currently
selected.
8 HDMI Input
This is the input for the HDMI source device. When a valid source is
detected by the splitter, the Link LED will activate.
9 HDMI Out 1
This is the fi rst HDMI output port. Connect a valid HDMI display to this port.
When the External EDID mode is active, the EDID form the display
connected to this port will be used to send to the source.
10 HDMI Out 2
This is the second HDMI output port. Connect a valid HDMI display to this
port.
11 5V DC Power Input
This port is for the included 5V DC power supply. When a valid 5V power
supply is attached, the Power LED will activate.