manualshive.com logo in svg

Gefen EXT-HDKVM-LAN, Руководство пользователя, Страница: 54 / 62

Поделиться
Скачать
Gefen EXT-HDKVM-LAN Скачать руководство пользователя страница 54

page | 44

Appendix

Upgrading the Firmware

The following items are required to upgrade the firmware:

• 

Gefen DVI KVM over IP

• 

Computer (Mac or PC)

• 

Firmware files

 

 

1. 

Download the firmware for the DVI KVM over IP from the Gefen Web site.

2. 

Extract both firmware files from the .ZIP file.  The .ZIP file contains two files:

 

►

TX_host_kernel_A511_webfwh_v[version]d.bin

 

(Sender unit)

 

►

RX_client_kernel_A511_webfwc_v[version]d.bin

  (Receiver unit)

 

3. 

Access the Web interface by entering the IP address of the Sender or Receiver unit.  

The order in which the Sender and Receiver units is upgraded does not matter.

 

Refer to 

Displaying the IP Address

 if necessary.

4.  Under the 

System

 tab, click the 

Update Firmware

 frame.

5.  Click the 

Browse...

 button and select the firmware for the unit that is being upgraded:  

If upgrading the Sender unit, select the filename beginning with “TX”.  If upgrading the 

Receiver unit, select the filename beginning with “RX”.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6.  Click the 

Update

 button.

7.  After a few moments, the Web interface will indicate that the upgrade process has 

been started.

Содержание EXT-HDKVM-LAN































































Отзывы:

Нет отзывов