manualshive.com logo in svg

Gefen EXT-HDFST-848CPN, Руководство пользователя

Поделиться
Скачать
Gefen EXT-HDFST-848CPN Скачать руководство пользователя страница 28

24

EDID MANAGEMENT

External EDID Management

The

8x8 Crosspoint Matrix for HDMI

 features EDID Management.  Before the

I

source can send video or audio signals, the source device reads the EDID
(Extended Display Identifi cation Data) from the output devices connected to the

8x8 Crosspoint Matrix for HDMI

.  The EDID contains information about what type

of audio/video data that the source can send to each output device.

The following EDID features are copied from Output A:

•

Supported Resolutions

•

3D Support

•

Audio Features

Display Connections:

•

If a device is not connected to Output A, then no EDID changes are made,
meaning that the previous EDID information will be used.  This state will be
in effect until a display is connected to Output A and the Matrix is power-
cycled.

•

EDID is built from Output A to the Input.  The audio block will be copied
from Output A.  EDID-copying is performed only when the Matrix is reset or 
power-cycled.

Содержание EXT-HDFST-848CPN

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды