CONNECTING AND OPERATING THE HD-1000
How To Connect The HD-1000
1.
Connect the HDMI source to the HD-1000 sender unit using the supplied HDMI
cable.
2.
Connect a user supplied CAT-5, CAT-5e or CAT-6 cable to the sender unit.
3. Connect four user supplied multi-mode LC terminated fi ber optic cables into
HD-1000 sender unit.
NOTE:
50 or 62.5 micron multi-mode fi ber optic cable is required for operation of
the HD-1000.
4. Connect the other end of the CAT-5, CAT-5e or CAT-6 cable into the HD-
1000 receiver unit.
5. Connect the other ends of all four multi-mode LC terminated fi ber optic
cables into the HD-1000 receiver unit.
NOTE:
Please take careful note of the labeling above each fi ber optic port on
both the sending and receiving HD-1000 units. The most common user error is
to mis-match the fi ber optic cable connections on each end, which results in no
video being transmitted.
6. Connect the display to the HD-1000 receiver unit using a user supplied
HDMI cable.
7. Connect the included 5V DC power supplies into both the HD-1000 sending
unit and receiving units.
8. Power on the display, followed by the source.
No further adjustments are necessary to operate the HD-1000.
5