Gefen EXT-DVIKVM-441, Руководство пользователя

Страница: 13 / 19

10
RMT-4IR REMOTE AND 4X1 KVM SWITCHER CONFIGURATION
How to Resolve IR Code Confl icts
In the event that IR commands from other remote controls confl ict with the
supplied RMT-4IR remote control, changing the remote channel will alleviate this
issue. The RMT-4IR remote control and the 4x1 DVI KVM Switcher both have
banks of DIP (Dual Inline Package) Switches for confi guring the remote channel
that both units use to communicate. These settings must exactly match each
other for proper operation.
The DIP Switch bank on the RMT-4IR is located underneath the battery cover.
DIP Switch banks for the 4x1 DVI KVM Switcher are located on the underside of
the unit beneath a piece of metallic-like tape. The DIP switch bank (4 switches)
is for the adjustment of remote control frequencies and switch behavior.
Switches 1 and 2 on the RMT-4IR directly correspond to DIP Switches 1 and 2
on the 4x1 DVI KVM Switcher. Only switches 1 and 2 (of 4 in that bank) are used
for IR Code settings.
Remote Channel 1:
Default
1 2
Remote Channel 2:
1 2
Remote Channel 3:
1 2
Remote Channel 4:
1 2
Left: Picture of the opened rear battery
compartment of the RMT-4IR remote showing
the exposed DIP Switch bank between the
battery chambers.
4x1 DVI KVM Switcher
Remote Channel 1:
Default
Remote Channel 4:
1 2 3 4
1 2 3 4
Remote Channel 3:
1 2 3 4
Remote Channel 2:
1 2 3 4