Gefen EXT-DVI-FM15, Руководство пользователя

Страница: 12 / 16

CONNECTING THE DVI 1FO EXTENDER
8
How to Connect the DVI 1FO Extender
1. Connect the Sender module to the DVI source.
2. Connect the Receiver module to the DVI display.
3. Connect the Sender module and Receiver module together using a single-
strand multimode SC-terminated
fi ber optic cable.
4. Connect the included power supply to the Receiver module.
Wiring Diagram for the DVI 1FO Extender
STOP:
If EDID programming is required, then skip to the EDID
Programming Procedure on the next page. If an EDID is not
required by the DVI source, then programming is not necessary.
EXT-DVI-FM15
DVI Display
Sender
Receiver
FIBER OPTIC CABLE
DVI Source
IMPORTANT:
In most cases the Sender module will
not
require a
t
power supply as long as the DVI source provides suf fi cient power
on pin 14 of the DVI connector. If the source does not supply
enough power to the Sender module, then a power supply must be
connected to the Sender module.