Gefen EXT-DVI-3500HD, Руководство пользователя

Страница: 13 / 18

10
RECEIVER PANEL DESCRIPTIONS
11 Remote USB A Device Input
This input is intended for use by remote USB devices. These inputs (4 are
available) are only active when the control switch on the front panel of the
sender unit is set to remote. This connector is the USB B type. A LED indicator
is located next to each input to indicate that a good connection has been made
between the unit and the USB device.
12 DVI Output
This port is will accept a single digital DVI capable display. This port is always
active, unlike the USB ports which are selectable by the control switch. This port
will replicate the video signal that is input through the DVI input on the sender
unit.
13 Fiber Optic Input A and B
This connector accepts 2 pairs of LC terminated fi ber optic cable that will link the
sending and receiving unit together. When the cables between this port and the
corresponding ports on the receiver are properly connected, the LED indicator
labeled Optic A and Optic B on the front panel of both units will become active.