CONNECTING AND OPERATING THE 1:2 DVI SL Splitter
How to Connect the 1:2 DVI SL Splitter to your devices
1- Connect the supplied Single Link DVI cable from the back of the computer into
the input of the 1:2 DVI SL Splitter.
2- Connect the cable from your fi rst display (monitor or projector) into the DVI Out
1 slot on the 1:2 DVI SL Splitter. (this will be what the computer will recognize)
3- Connect the cable from your second display (monitor or projector) into the DVI
Out 2 slot on the 1:2 DVI SL Splitter.
4- Plug the 5v power supply into the 1:2 DVI SL Splitter.
5- Plug the 5v wall mount power supply into the wall outlet.
6- Restart your computer only after you’ve made all the connections. Please see
the paragraph explaining the function of the Equalization knob under the diagram
of the product below.
7- Adjust the EQ to resolve any imperfections in the image.
*Note:
Only output #1 of the 1:2 DVI SL Splitter is HDCP pass-through
.
4
The external equalization knob can be used to equalize the incoming signal
resulting from long cables for better picture quality. By turning the equalization
knob clockwise or counter-clockwise you will eliminate any noise and/or
degradation in the signal. You should be able to fi nd a “sweet spot” somewhere in
the middle.
Input Equalization
Adjustment
External equalization control for the 1:2 DVI SL Splitter
EQUALIZATION CONTROL
