Connecting and Operating the SL Switcher
How to Connect the SL Switcher to your devices
1-
Connect the supplied cables from your fi rst computer into the DVI In 1, USB In 1,
and Audio In 1 connection in the back of the SL Switcher.
2-
Connect the supplied cables from your second computer into the DVI In 2, USB In 2,
and Audio In 2 connection in the back of the SL Switcher.
3-
Connect the monitor to the DVI Out connection.
4-
Connect your USB devices (e.g. keyboard, mouse) into the USB Out.
5-
Connect your speakers to the Audio Out.
6-
Plug the 5VDC power supply into the SL Switcher.
How to Operate the SL Switcher
1-
Use the front panel push button to switch between sources.
2-
Use the RMT-2IR wireless remote control to remotely switch between sources.
3-
Use the optional RMT-2 wired remote control to remotely toggle between sources.
Operation Notes
When turning on or rebooting your computers, the SL Switcher must be selected
to the computer that is booting until the computer completes the boot cycle. This
step can be eliminated using the Gefen DVI Detective.
If you loose your picture when switch from source 1 to source 2 or viasaversa
you will require a DVI Detective.
The equalization knobs can be used to balance out signal noise resulting from
long cables for better picture quality.
4
