CONNECTING AND OPERATING THE DVI 1500
How To Connect The DVI 1500
Connect the DVI source to the DVI 1500 sender unit using the supplied DVI
1.
cable.
Connect a user supplied CAT-5, CAT-5e or CAT-6 cable to the sender unit.
2.
Connect four user supplied multi-mode LC terminated fi ber optic cables into
3.
DVI 1500 sender unit.
NOTE:
50 or 62.5 micron multi-mode fi ber optic cable is required for operation of
the DVI 1500.
Connect the other end of the CAT-5, CAT-5e or CAT-6 cable into the DVI
4.
1500 receiver unit.
Connect the other ends of all four multi-mode LC terminated fi ber optic
5.
cables into the DVI 1500 receiver unit.
NOTE:
Please take careful note of the labeling above each fi ber optic port on
both the sending and receiving DVI 1500 units. The most common user error is
to mis-match the fi ber optic cable connections on each end, which results in no
video being transmitted.
Connect the display to the DVI 1500 receiver unit using a user supplied DVI
6.
cable.
Connect the included 5V DC power supplies into both the DVI 1500 sending
7.
and receiving units.
Power on the display, followed by the source.
8.
No further adjustments are necessary to operate the DVI 1500.
5
im Vertrieb von
CAMBOARD Electronics
www.camboard.de Tel. 07131 911201
Fax 07131 911203