CONNECTING AND OPERATING THE 1:2 DVI SL Splitter
How to Connect the 1:2 DVI SL Splitter to your devices
1- Connect the supplied Single Link DVI cable from the back of the computer into the
input of the 1:2 DVI SL Splitter.
2- Connect the cable from your first display (monitor or projector) into the DVI Out 1 slot
on the 1:2 DVI SL Splitter. (this will be what the computer will recognize)
3- Connect the cable from your second display (monitor or projector) into the DVI Out 2
slot on the 1:2 DVI SL Splitter.
4- Plug the 5v power supply into the 1:2 DVI SL Splitter.
5- Plug the 5v wallmount power supply into the wall outlet.
6- Restart your computer only after you’ve made all the connections.
7- Adjust the EQ to resolve any imperfections in the image.
*Note: Only output #1 of the 1:2 DVI SL Splitter is HDCP pass-through.
4
Input Equalization
Adjustment
External equalization control for the 1:2 DVI SL Splitter
The external equalization knob can be used to equalize the incoming signal resulting
from long cables for better picture quality. By turning the equalization knob clockwise
or counter-clockwise you will eliminate any noise and/or degradation in the signal. You
should be able to find a “sweet spot” somewhere in the middle.
EQUALIZATION CONTROL
