Gefen CAT5-6000, Руководство пользователя, Страница: 12 / 16

9
CAT5 CABLE LENGTH SETUP
Jumper settings are used to set the focus of the picture and characters to the best possible
sharpness. The jump ers in the CAT5•6000R are set at the factory as shown in the diagram
below. The
fi rst step to adjusting the video is to have the CAT5•6000S and CAT5•6000R
con nect ed together with the CAT-5 cable that is going to be used in the in stal la tion. Then
set your computer to the resolution that you will be using most frequently. Then removing
the top of the CAT5•6000R by un screw ing the top two screws on either side of the box. Set
the jumpers to the recommened jumper setting based on the length of your CAT-5 cable.
If you still see some smear ing adjust try moving all the jumper up or down one from the
recommended setting. If you see smearing of just one color adjust an individual jumper
for the color that is smearing (it can be two colors). Repeat the same steps for monitor 2.
Jumper Settings
Video 1 on the
left
Red Green Blue
Video 2 on the
right
Red Green Blue
4
3
2
1
Po
si
tion
Cable
0-132 feet
133-198
199-264 feet
265-330 feet
Recommended Jumper Settings