Gefen CAT5-1000HD, Руководство пользователя

Страница: 13 / 17

SERVICE SWITCH USAGE GUIDE
9
Gefen CAT5 DVI Extenders (sender and receiver) both contain a pair of service
switches located on the board. These service switches are used to select from a set of
confi gurations that will equalize the signal to best match the conditions in your setup.
Sender Service Switches
Option No. Switch 1 Position Switch 2 Position Description
1 0 (OFF) 0 (OFF) Strong Line Driver
(Default)
2 1 (ON) 0 (OFF) Weak Line Driver
Receiver Service Switches
Option No. Switch 1 Position Switch 2 Position Description
1 0 (OFF) 0 (OFF) EQ 0
(Default)
2 1 (ON) 0 (OFF) EQ 1
3 0 (OFF) 1 (ON) EQ 2
4 1 (ON) 1 (ON) EQ 3
Adjustment Guidelines:
1) Higher EQ level is used to equalize poor/low quality CAT-5e cables
2) Stronger Line Driver is used to boost signals through longer cables
3) It is an optimal balance of Line Driver and EQ that will result in the best possible
picture.