Gefen TOOLBOX GTB-HDMI1.3-444, Руководство пользователя

Страница: 16 / 28

CHANGING THE I/R CHANNEL
How To Change The I/R Channel
Use the following procedure to set the proper I/R channel on the Matrix.
1 Press and hold the Out 1 button for 5 seconds to enter I/R channel selection
mode. The bank of blue LED indicators will now display the currently
selected I/R channel.
2 Press the Out 1 button to cycle through each I/R channel. The currently
selected I/R channel will by indicated by a flashing blue LED. IMPORTANT:
The selected I/R channel must be the same as the I/R channel set on the
I/R Remote (page 11). Refer to the table below for setting the I/R channel.
3 Once the proper I/R channel has been selected, press and hold the Out 1
button for 5 seconds to confirm and exit I/R channel selection mode. The
currently selected input source will now be indicated.
I/R Channel Table
Input LED I/R Channel
1 0
2 1
3 2
4 3
12