page | 65
Advanced Operation
Commands
#set_output_name
The
#set_output_name
command assigns a name to the specified output on the matrix.
Output 17 is
HDMI Local Out
.
Syntax
:
#set_output_name param1 param2
Parameters
:
param1
Output
[1
...
17]
param2
Name
Example
:
#set_output_name 3 Sony_XBR
Sony_XBR NAME IS ASSIGNED TO OUTPUT 3
#set_preset_name
The
#set_preset_name
command names the specified preset. The name of the preset
cannot exceed 20 characters in length Spaces are not permitted when naming presets.
If a space is required, then use the underscore (“_”) character.
Syntax
:
#set_preset_name param1 param2
Parameters
:
param1
Preset
[1
...
8]
param2
Name
Example
:
#set_preset_name 8 Studio51
Studio51 NAME IS ASSIGNED TO PRESET 8
