Gefen Pro GEF-DVIKVM-848DL-PB, Руководство пользователя

Страница: 65 / 92

61
RS-232 / TELNET COMMANDS
l Command
The l (lower-case “L”) command displays the link status of each input. If the
input is receiving a dual-link signal, then the Link status will be set to “Dual”. If a
single-link source is used, then the Link status will be set to “Single”.
Syntax y :
l
Parameters:
None
Example p :
l
Input | Signal | Link
--------|----------|--------
1 | NONE | Single
2 | NONE | Single
3 | NONE | Single
4 | NONE | Single
5 | NONE | Single
6 | NONE | Single
7 | NONE | Single
8 | NONE | Single
--------|----------|--------