Gefen Pro GEF-3GSDI-2-HDS Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 51

Gefen Pro GEF-3GSDI-2-HDS Скачать руководство пользователя страница 18

MENU SYSTEM

15

Output > Deep Color

The 3GSDI to HD Scaler supports Deep Color at 10 bits at 4:4:4. Deep Color
can be set to Automatic or Forced to 8 bits. To be able to output HDMI 1.3 in
Deep Color at 10 bits you must be using YCbCr 4:4:4 or the RGB 4:4:4 output
color space (YCbCr 4:2:2 does not support Deep Color). Some monitors may
support Deep Color in only one of the possible link con

fi

gurations (RGB and

YCbCr 4:4:4), while others may not support Deep Color at all. Verify the user
manual for the output device color space support information.

• Automatic

Transmits in Deep Color whenever possible, according to the EDID
information of the output device.

•

Force 8 bits

Disables the transmission of Deep Color packets.

Input Menu

Input > Input Format

When the Scaler detects a valid SDI/HD-SDI/3G-SDI input signal, the input
format is displayed at the bottom of the OSD. The detected input format is also
checked in the Input Format menu. Auto Detect is checked if no valid input is
found. In such cases, the Scaler can be set to use a speci

fi

c format. To use a

speci

fi

c input format, set the color space using the

Output > Link Confi guration

menu. Setting the color space will avoid mistakes such as confusing 1080p dual
link resolution with 1080p single link. With single link resolutions, the input source
can be set to input 1 or input 2. Therefore, exert caution when setting the input
format.

«
...
16
17
18
19
20
...
»

Содержание GEF-3GSDI-2-HDS




















































Отзывы:

Нет отзывов