Boost-N Part#:GT-APN User Manual
21
Reset
Click the
Reset
button to abort change and recover
the previous configuration setting.
PPPoE
Item
Description
PPPoE
Click to select PPPoE support on WAN interface.
There are user name, password, connection type and
idle time settings need to be done.
User Name
If you select the PPPoE support on WAN interface, fill
in the user name and password to login the PPPoE
server.
Password
If you select the PPPoE support on WAN interface, fill
in the user name and password to login the PPPoE
server.
Service Name
Fill in the service name of Service Name. The default
value is empty.
Connection Type
Select the connection type from pull-down menu.
There are
Continuous
,
Connect on Demand
and
Manual
three types to select.
Continuous
connection
type means to setup the connection through PPPoE
protocol whenever this WLAN Broadband Router is
powered on.
Connect on Demand
connection type means to setup
the connection through PPPoE protocol whenever you
send the data packets out through the WAN interface;
there are a watchdog implemented to close the PPPoE
connection while there are no data sent out longer
than the idle time set.
Manual
connection type means
to setup the connection through the PPPoE protocol
by clicking the
Connect
button manually, and clicking
the
Disconnect
button manually.
Idle Time
If you select the
PPPoE
and
Connect on Demand
connection type, fill in the idle time for
Содержание Boost-N GT-APN
Страница 1: ......