5
4
STEP 3.
Enter your information
to log in.
3
Activate
STEP 1.
Press and hold the Reset Button for 6 seconds. The LED indicator light
will begin to rapidly flash, indicating that your sensor is ready to connect
via Easy Mode.
What does the blinking light mean?
Reset the sensor by pressing and holding the Reset Button for 6 seconds. The LED
Indicator Light will begin to flash rapidly.
- Reset one time (press and hold) to reach Easy Mode (Rapidly blinking blue, 2x per
second)
- Reset again (press and hold) to reach AP Mode (Slowly blinking blue, 3x per seconds)
Note:
You must remove the sensor’s cover to view the Reset Button and LED Indicator
Light. Press the Disassemble Button to remove the sensor’s cover
2
Register a Geeni account, con.
Reset Button
LED Light
Disassemble button