Geemarc iLoop, Инструкция по эксплуатации

Страница: 6 / 10

6
USING THE GEEMARC iLOOP
Place the wire around your neck. Insert the round connector plug
into the Neckloop Quick Disconnect plug; this forms a loop around
your neck. Ensure you have double clicked the connection.
Connect the 3.5mm plug of the Geemarc iLOOP to the headphone
socket of your audio device
Switch your hearing aid to T (or MT) mode.
Press the ON/OFF button to switch on the Geemarc iLOOP. The
green light will turn on.
The volume of the Geemarc iLOOP can be adjusted by using the
volume control knob found on the bottom of the Geemarc iLOOP.
This gives up to 30 dB gain.
Press the ON/OFF button to switch off the Geemarc iLOOP. The
green light will turn off.
Reset your hearing aid if necessary.
Do not forget to turn OFF your Geemarc iLOOP at the end of
the call. Failure to do this will drain the batteries after about
30 hours.