Geemarc ClearSound LoopHEAR 101, Руководство по быстрой настройке

Страница: 15 / 19

14
The RED LED is flashing
•
Charge the battery
The LoopHEAR
TM
keeps on switching off
•
Make sure that the batteries are fully charged
You cannot hear clearly due to interference or you cannot
hear at all
•
.Make sure the LoopHEAR
TM
is switched on and facing you
•
.Move the LoopHEAR
TM
closer to you
BATTERY USAGE:
To ensure that your LoopHEAR
TM
is always ready for use
please follow the recommendations below:
•
Always switch off when not in use
•
Always recharge the batteries after continuous use for more
than 6 hours or when the red LED is ON
•
Recharge the batteries every four months if the unit has
been switched OFF for long periods of time
As a rough guide the battery will allow the following usage
depending on the volume levels and ambient noise:
•
STANDBY WHEN TURNED OFF 4 MONTHS
•
STANDBY WHEN TURNED ON BUT NOT IN USE 2 DAYS
•
IN CONTINUOUS USE 8 HOURS
FROM FULLY CHARGED BATTERY
TROUBLESHOOTING