Geemarc ClearSound CC40, Руководство пользователя

Страница: 21 / 24

REMOTE ACCESS CARD
To record a new outgoing message (OGM)
1 Dial your number.
2 During the OGM, press (
✳ ✳
✳ ✳
✳
).
You’ll hear 2 beeps.
3 Enter your security code.
You’ll hear 2 beeps.
4 Within 4 seconds, press 4 7 (for OGM1) or 4 9 (for
OGM2).
5 Speak after the 4 beeps, then press 7. Your OGM
will be played back.
6 To hear the new OGM again press 4 1 (OGM1) or
4 3 (OGM2).
To switch the machine on or off
1 Dial your number.
If the machine’s off it’ll answer after 15 rings.
2 During the OGM press (
✳ ✳ ✳ ✳ ✳
).
You’ll hear 2 beeps.
3 Enter your security code.
You’ll hear 2 beeps.
4 Within 6 seconds, press 0 to switch on or 8 8 to switch
off.
RC/CC40 Issue 2 04/00
REMOTE ACCESS CARD
NOTE: When leaving the factory, the security code is set
to 1 2 5.
Write down your security code.
To listen to messages
1 Dial your number.
2 During the OGM, press (
✳ ✳
✳ ✳
✳
).
You’ll hear 2 beeps.
3 Enter your security code.
• To pause, press 7. To continue, press 7.
• To skip backwards, press 2.
• To skip forwards, press 5.
• To switch day/time stamping off, press 1.
• To erase an individual message, press 3
during message playback.
• To erase all messages: after you hear ‘end
of messages', press 3 3.
• To replay all messages: when they've
finished, press 7.
• To listen to memos, press 9 4.
• To stop, press 7 and hang up.
• If the machine stops during playback press
7 to continue.