12
OPERATION
Initial Operation
1. Make sure the CL7370 is plugged
into the main.
2. Switch ON the CL7370 – at the
back of the Charging Cradle (see
figure (1) at right).
3. Place the Headset in the Charging
Cradle for at least three hours to
allow it to fully charge.
z
The Headset is switched OFF
automatically when it is placed in
the Charging Cradle.
z
The LED Indicator shows red
during charging.
z
It will glow green when the battery
is fully charged (see figure (2) at
right).
4. After three hours and when the
charging LED has turned green,
you can proceed to the Routine
Operation.
Routine Operation
1. Turn ON the Audio Source (TV
set or audio device) where the
Transmitter is connected to.
2. Take out the Headset Receiver
from the charging Cradle, headset
will turn ON automatically, (if not,
short press the MIC button to
power on the Headset), The blue
signal LED Indicator both on Base
and headset will glow continuously.
(see figure (3) at right).
OPERATION
