5
6
7
8
►
MSG PLAYBACK
►
DELETE ALL
►
MEMO
►
TAM ON/OFF
►
TAM SETTINGS (ANSWER MODE, TAM LANGUAGE, OGM
SETTINGS,ANSWER DELAY, RECORD TIME, COMPRESSION,
BS SCREENING,REMOTE ACC, CHANGE PIN)
HANDSET REGISTRATION
Note
: Handset and base station are pre-registered.
Up to five handsets can be registered to a single base station.
In the case of re-registration, the PIN code is
0000
.
Registration a handset
On Handset:
Press
MENU/OK
select
▼▲
REGISTRATION
Press
MENU/OK
select
▼▲
BASE(1-4), Press
MENU/OK
enter 4 digits PIN for the base PIN.
At the same time on
Base
: press and hold
/HANDSET
LOCATOR
on the base to enter the registration mode.
After a short delay, if the registration is successful, there will be a
confirmation beep, and the handset display will go back to idle
mode with the new handset number shown. The base display will
also go back to idle mode.
De-Registration
On Handset
: Press
MENU/OK
, select
▼▲
BS SETTINGS,
press
MENU/OK
, select
▼▲
DELETE HS, press
MENU/OK
enter PIN
0000
, press
MENU/OK
, select
▼▲
one of
the handsets that you want to de-register, press
MENU/ OK
to confirm.
INTERCOM
Internal Call
Press
C / MUTE
, Enter the desired handset number on
keypad.
NOTE:
If only one cordless handset is registered to the base station,
internal call will not be available.
Call All Handsets
Press
C / MUTE
, Enter "
9
" on keypad.
Transfer an External Call
Press
MENU / OK
, select
▼▲
INTERCOM, Press
MENU /
OK
,
Enter the desired handset number on keypad.
After connection quit the call on handset.
Conference Call
Press
MENU / OK
, select
▼▲
INTERCOM, Press
MENU
/ OK
,
Enter the desired handset number on keypad.
After connection press and hold
until CONFERENCE is
shown.
NOTE:
Any party hangs up during a conference call will leave the other
party still in connection with the external call.
PHONEBOOK
Your phone can store up to 50 private phonebook in the cordless
handset and the telephone base with names and numbers. Each
phonebook entry can have a maximum of 20 digits for the phone
number and 12 characters for the name. You can also select
different ringer tones for your phonebook entries.
Phonebook entries are stored alphabetically by name.
To Add new entry
In idle mode :
Press
MENU / OK
, select
▼▲
PHONEBOOK to access the
phonebook list ( or empty),
Press
MENU / OK
to select ADD.
Press
MENU / OK
to select NAME ,enter the name.
Press
MENU / OK
to select NUMBER, enter number.
Press
MENU / OK
and
▼▲
to select the desired
ringtone for your phonebook entry.
Press
MENU / OK
to save.
DIRECT MEM
Your AMPLIDECT295 base can also paired as additional
handsets with some specific handset/device like our
PhotoDECT295 or EMERGENCY295 which need direct memory
numbers programed in the base, and these numbers ( 4 maxi )
have to be added through the regular handset.
On Handset
:
Press
MENU / OK
, select
▼▲
DIRECT
MEM,
Press
MENU / OK
, select
▼▲
M1-M2-M3-M4,
Press
MENU / OK
, enter number then OK.
ANSWERING MACHINE
Your telephone base includes a telephone answering machine
that records unanswered calls when it is on. The answering
machine can store up to 59 messages within the maximum
recording time of approximately 15 minutes. As well as recording
incoming messages, you can record memos for other users of
your phone.
Press
/ANS ON/OFF
to switch the answering machine ON or
OFF.
REMOTE OPERATIONS
If you are away from your home, you can call your answering
machine to switch on or off the answering machine and listen to
your messages remotely using another tone-dialing phone.
1. Place a call from a tone-dialing phone.
2. When the answering machine answers the call and starts
playing OGM, press
.
3. Enter the 4-digit Remote Access PIN (default PIN is
0000
).
4. Press the following keys to carry out your desired function.
key
Functions
While message is not
playing
While message is playing
2
Delete the current message
playback
4
Repeat playing the current
message from the beginning.
Press twice to skip backward to
the previous message.
5
Play the message
6
Skip forward to play the next
message
7
Turn on the answering
machine
8
Stop the current message
playback
9
Turn off the answering
machine
*
Enter the 4-digit remote
access PIN
NOTE:
When your answering machine memory is full and the answer
mode is in ANS & RECORD, the answer mode will change to
ANSWER ONLY automatically.
It will change to ANS & RECORD mode automatically after some
messages have been deleted.
You cannot delete new messages before they were listened.
TECHNICAL SPECIFICATIONS
Basic Information
Valid Range
Indoor : 50m
Outdoor :300m
Handset Operating time
Standby time : 100 hours
Talk time : 10 hours approx.
RF Parameter
Frequency
1.88 GHz to 1.9GHz
Nb Channels
10
Power Supply
Base
Input 100-240V 50/60Hz; output 6V;
450mA adapter
Charger
Input 100-240V 50/60Hz; output 6V;
450mA adapter
Handset
2.4V ; 500mAH rechargeable NiMh
battery pack
MAINTENANCE
Clean the surface of the housing with a soft, fluff-free cloth. Do
not use any cleaning agents or solvents.
GUARANTEE
From the moment your Geemarc product is purchased, Geemarc
guarantee it for the period of two years. During this time, all
repairs or replacements (at our discretion) are free of charge.
Should you experience a problem then contact our help line or
visit our website at
www.geemarc.com
.
The guarantee does not cover accidents, negligence or
breakages to any parts. The product must not be tampered with
or taken apart by anyone who is not an authorized Geemarc
representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT:
YOUR RECEIPT IS PART OF YOUR
GUARANTEE AND MUST BE RETAINED AND PRODUCED IN
THE EVENT OF A WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom
only.
DECLARATIONS:
CE Directives
Geemarc Telecom SA hereby declares that this product
is in compliance with the essential requirements and other
relevant provisions of the Radio and Telecommunications
Terminal Equipment Directive 2014/53/UE and in particular article
3 section 1a,1b and section 2. The telephone does not operate if
the line current is lower than 18mA.
The CE declaration of conformity may be consulted at
www.geemarc.com
Electrical connection:
The apparatus is designed to operate
from a 230V 50Hz supply only. (Classified as hazardous voltage
according to EN60950 standard). The apparatus does not
incorporate an integral power on/off switch. To switch off the
apparatus, disconnect the power adaptor.
When installing the apparatus, ensure that the mains power
socket is readily accessible.
Telephone connection:
Voltages present on the telecommunication network are classified
TNV-3 (Telecommunication Network Voltage) according to the
EN60950 standard.
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment)
has been put in place for the products at the end of their
useful life are recycled in the best way.
When this product is finished with, please do not put it in your
domestic waste bin. Please use one of the following disposal
options:
- Remove the batteries and deposit them in an appropriate WEEE
skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a new
one, they should accept it.
Thus if you respect these instructions you ensure human health
and environmental protection.
For product support and help visit our website at
www.geemarc.com
telephone
01707 387602
or fax
01707 832529
QUGAMPLIDECT295_En_A3_V1.0
